The Harver Group

The Harver Group

Well-being, Communication, Community

17 Supporters

  • Power Solutions Harver Group Water Heaters

    Community

    Capture_432_

    Water Heaters

    Split magnetic water heater has two parts: storage tank & generator unit • NCRS Certified • fitted Temperature/Pressure valve included • Includes Safety pressure valve • 15 Amp plug connection • 3 year warranty on manufacture & material defects

    Description

    Salient Features • Split magnetic induction water heating • High quality insulation • Stainless steel water storage unit • Attractive plastic housing material • Wall mounted installation • Capacity: 30L, 40L, 50L, 60L • Power range required : 2000 - 4000w • Voltage : 220v • Standard plumbing fitting • Class 2 safety rating (no transfers of AC to contents) • 15 Amp plug connection • No maintenance costsCan be installed at point of use

    How it works

    Using a magnetic induction process the water is heated more rapidly than conventional water geysers

    The electrical supply to the generator in the unit is converted into a magnetic field which heats the water

    There is no direct alternating current (AC) in close proximity to the water, which makes the unit safe

    The unit uses new temperature sensing technology that is more accurate

    The unit includes a high density thermal insulation layer, to sustain the water temperature

    Technical Aspects

    The unit has a Class 2 safety rating, the first of its kind in the word, primarily because there is NO transfer of alternating current (AC) into the water or the holding tank

    The risk of rupture of the geyser is eliminated as a built in temperature - pressure valve forms part of the unit (factory installed)

    The electrical configuration of the unit is such that the likelihood of switch leakage malfunction is reduced, as is the buildup of pipe rust & iron content in the water

    The unit includes a high density thermal insulation layer around the storage tank, which is made stainless steel and magnesium for increased product life

    The geyser draws between 2kw - 4kw of power depending on the size of the geyser

    Electricity Usage

    To heat a conventional150lt geyser from 20DegC to 65DegC takes two and a half hours and uses 7.8kw of electricity

    To heat the same amount of water via the Harver induction water heater will take approximately 1 hour and uses approximately 2.5kw of electricity

    Operating cost Approximately 1/3 of the cost of a conventional geyser

    Substantial water saving due to location of the unit

Leave a Response

Fields marked * are required


No file selected (must be a .jpg, .png or .gif image file)


Once published, you will have 15 minutes to edit this response.

Cancel

The power of Harver is that we are taking a fresh look at people and organizations.

Join This Group

The Harver Group

Contact The Harver Group

Moderator: Beatrice Stewart